Micro Documentation
Esite Modular Product Description ▾
Esite Modular Installation Guide Esite Modular Operations Manual Esite Modular Product Description Esite x10 Installation Guide Esite x10 Operations Manual 13.10/12.10 Esite x10 Operations Manual 13.11 Esite x10 Product Description Micro Operations Manual 14.16

1 General information

1.1 Document focus

This document is a description of the eSite Modular system. It focuses on the different hardware characteristics of the offered system components, and the various software capabilities and options. It will also birefly explain how the product works on site with associated systems.

1.2 Warning levels

⚠️ Warning

Highlights hazards that can result in personal injuries. It can also result in serious damage to mechanical structures and equipment.

🚨 Caution

Highlights hazards that can result in damage to the equipment.

ℹ️ Note

Highlights general useful information.

✅ Read

Highlights that there is information to read in addition to this document. That information must be considered when operating the device or control.

1.3 Trademarks

eSite™ and eSite Tools™ are registered trademarks of eSite Power Systems AB (publ) and will be referred to here after as eSite and eSite Tools.

1.4 Available product documentation

eSite Modular documentation
Product Description
Installation & Site Commissioning Manual
Operations Manual

1.5 Abbreviations and definitions

AbbreviationDescription
AAmpere
AhAmpere hour
ACAlternating Current
ATSAutomatic Transfere Switch
°CDegree Celsius
CANController Area Network
CEConformité Européenne
DCDirect Current
ECEuropean Conformity
EMCElectromagnetic Compatibility
GNDElectrical Ground
HPHigh Priority
HzHertz
kWKilowatt
LPLow Priority
MCBMiniature Circuit Breaker
MPPTMaximum Power Point Tracker
MHzMegahertz
N/ANot Available
NTPNetwork Time Protocol
PVCPolyvinyl chloride
RMSRemote Monitoring System
SCRSilicone controlled rectifiers
SOCState of charge
SIMSubscriber Identity Module
VVolt
VAC Volts of Alternating Current
VDC Volts of Direct Current
WWatt
WLANWireless Local Area Network
DefinitionDescription
Associated systemsThe term associated systems refers to parts or systems outside of the eSite Modular system, e.g. the battery bank, the genset, the grid and the solar arrays.
Customer loadThe customer load is the equipment that is supplied with power from the eSite Modular system.
Converter UnitThe Converter Unit contains the power electronics of the eSite Modular system. The Converter Unit must not be opened.
RMCThe RMC contains the main controller, the 4G radio modem and all communication interfaces of the eSite Modular system
eSite ToolseSite Tools is an RMS that monitors several eSite Modular systems in a network. eSite Tools can be used to view the status of all sites in a network and to create a variety of reports. It can also be used for software downloading and for configuration changes.
eSite WebeSite Web is the local eSite Modular interface that can be reached on site.
TenantThe tenant is the telecom operator that receives power through the eSite Modular system. Each tenant can connect both high priority load and low priority load to the system. The power consumption can be separately measured for the connected tenants.

1.6 Compliance

eSite Modular is a carefully designed product with performed tests regarding quality, climate, electrical safety, heat and functionality.

This product and the system software has complied to and met the test standards of:

  • ETSI EN 300 386 V1.6.
  • ETSI 300 019-1-2 Class 2.
  • IEC/EN 60950-1:2005+A1+A11+A12+A
  • IEC/EN 60950-22:2006-A

1.7 CE-marking

eSite Modular complies to CE. EC (European Conformity) labels are found on both the RMC unit and the Converter Unit.