Micro Documentation
Esite Modular Operations Manual ▾
Esite Modular Installation Guide Esite Modular Operations Manual Esite Modular Product Description Esite x10 Installation Guide Esite x10 Operations Manual 13.10/12.10 Esite x10 Operations Manual 13.11 Esite x10 Product Description Micro Operations Manual 14.16

1 General Information

1.1 Document Focus

This document describes how to operate and maintain eSite Modular. It focuses on eSite Web, eSite Tools and the settings that can be done to the associated systems. For optional eSite accessories and installation of the associated systems see the Installation manual.

1.2 Target Group

This document is intended for the personnel that will operate and maintain eSite Modular. Such personnel can work both on site and from a distance via eSite Tools. The personnel must have sufficient basic skills and training.

1.3 Warning Levels

⚠️ Warning

Highlights hazards that can result in personal injuries, as well as serious damage to mechanical structures and equipment

🚨 Caution

Highlights hazards that can result in damage to the equipment.

ℹ️ Note

Highlights general useful information.

✅ Read

Highlights that there is information to read in addition to this document. That information must be considered when operating the device or control.

1.4 Trademarks

eSite™ and eSite Tools™ are registered trademarks of eSite Power Systems AB (publ) and will be referred to here after as eSite and eSite Tools.

1.5 Available Product Documentation

eSite Modular Documentation
Product Description
Installation Guide
Operation Manual

1.6 Abbreviations and Definitions

AbbreviationDescription
AAmpere
AhAmpere hour
ACAlternating Current
ATSAutomatic Transfer Switch
BMSBattery Monitoring System
BMUBattery Monitoring Unit
°CDegree Celsius
CANController Area Network
CEConformité Européenne
DCDirect Current
ECEuropean Conformity
EMCElectromagnetic Compatibility
GNDElectrical Ground
HPHigh Priority
HzHertz
kWKilowatt
LPLow Priority
MCBMiniature Circuit Breaker
MPPTMaximum Power Point Tracker
MHzMegahertz
N/ANot Available
NTPNetwork Time Protocol
PVCPolyvinyl chloride
RMSRemote Monitoring System
SCRSilicone controlled rectifiers
SoCState of charge
SIMSubscriber Identity Module
VVolt
VAC Volts of Alternating Current
VDC Volts of Direct Current
WWatt
WLANWireless Local Area Network
DefinitionDescription
Associated systemsThe term associated systems refers to parts or systems outside eSite Modular, e.g. the battery bank, the genset, the grid and the solar arrays.
Customer loadThe customer load is the equipment that is supplied with power from eSite Modular.
eSite ToolseSite Tools is a Remote Monitor and Control System that monitors several eSite Modular in a network. eSite Tools can be used to view the status of all sites in a network and to create a variety of reports. It can also be used for software downloading and for configuration changes.
eSite WebeSite Web is the local eSite Modular user interface. It is used to monitor data and configure the system on the site.
TenantThe tenant is the telecom operator that receives power through eSite Modular. Each tenant can connect both high priority load and low priority load. The power consumption can be separately measured for the connected tenants.